Production & capabilities

We buy stone as raw blocks and process it in our own works through four stages, until it becomes slabs and pieces ready to supply.

Schematic drawing, not to scale
01Selecting and sourcing blocks
Every material starts as a block. We select and buy large stone blocks from quarries and factories in Greece, Turkey, Italy and South America; they arrive in our yard and are numbered before cutting.
- Greece
- Turkey
- Italy
- South America
OutputA numbered raw block
Schematic drawing, not to scale
02Cutting blocks into slabs
The block is set under a gang saw, a frame of parallel blades that cuts it into slabs. Because the slabs come from the same block, the veining runs on from one slab to the next.
OutputFull slabs from one block
Schematic drawing, not to scale
03Cutting to size
When a project needs specific pieces, the slab goes onto the bridge saw table and is cut to the dimensions required: tiles, treads, sills, or pieces to the project's drawings.
OutputPieces at the required dimensions
Schematic drawing, not to scale
04Automatic polishing and bonding
Slabs pass along an automatic line where polishing heads work the surface until the stone's colour and veining come through, alongside the bonding operations carried out on the slabs.
OutputSlabs and pieces ready to supply

What this means for your project

Because we saw and cut the blocks ourselves, you can order stone in the form that suits your project.

Slabs as they come off the block, suited to large areas and designs where the veining should run on.

Pieces cut to the dimensions you specify: tiles, treads, sills, or pieces to drawings.

Tell us the stone, quantities, sizes and where the project is, and we'll reply on WhatsApp about availability and what we can supply.